Viton® Fluoroelastomer |
| Widely used elastomer offering industry high performance in a variety of applications requiring outstanding fluid resistance and low permeability to gases. It also benefits from good temperature extremes, good resistance to atmospheric oxidation, fungus and mould. The material comes in a variety of grades to maximise fluid resistance. | |
Features include: | |
* Fuel and Oil resistant | * Low Compression Set |
* Wide Temperature Range | * Choice of hardness |
* Long service life | * Chemical resistant |
* NBC Decontaminate compatible | |
| Fluoroelastomer material is available in rolls for Slitting and Die Cutting. Custom designed Extrusions and Mouldings are available. Die Cut gaskets have the option of integrated Compression Stops | |
* Industrial seals |  |
* Access panel gaskets | |
* Fluid seals | |
* Shock absorbtion | |
* Gaskets |
| Hardness: | 70° standard, others available on request |
| Colour: | Black |
| Temperature Range: | - 18° C to + 204° C |
| Availability: | Sheet from 1.0mm to 12.0mm thick |
| Custom Extrusions & mouldings. Consult our Technical department |
The data is provided for guidance only due to the varied conditions of potential use which are beyond our control. All recommendations or suggestions are given without guarantee or responsibility on our part and users should make their own test to determine suitability. |
| Viton ® is a registered trademark of DuPont Dow Elastomers. |
KEMTRON LTD |