 |
300 series - Rectangular Knitted Wire Mesh profiles bonded to Elastomer Cores |
|
| Solid Mesh to Silicone Sponge | Solid Mesh to Neoprene Sponge | ||
 | 312 = Monel wire 314 = TCS wire 316 = S/Steel wire |
| 322 = Monel wire 324 = TCS wire 326 = S/Steel wire |
| Mesh H | Mesh W | Carrier ht | Carrier w | Part No. |
| 2.4mm | 2.4mm | 2.4mm | 9.5mm | 0024-0024-0024-0095 |
| 2.4mm | 2.4mm | 2.4mm | 12.7mm | 0024-0024-0024-0127 |
| 3.2mm | 3.2mm | 3.2mm | 9.5mm | 0032-0032-0032-0095 |
| Silicone sponge core to Silicone Sponge | Neoprene sponge core to Neoprene Sponge | ||
| 382 = Monel wire 384 = TCS wire 386 = S/Steel wire |
| 372 = Monel wire 374 = TCS wire 376 = S/Steel wire |
| Mesh H | Mesh W | Carrier ht | Carrier w | Part No. |
| 2.4mm | 2.4mm | 2.4mm | 9.5mm | 0024-0024-0024-0095 |
| 2.4mm | 2.4mm | 2.4mm | 12.7mm | 0024-0024-0024-0127 |
| 3.2mm | 3.2mm | 3.2mm | 9.5mm | 0032-0032-0032-0095 |
| Note: All sizes listed are core sizes and allowance must be made for the wire mesh. This is normally 0.4mm for 1 layer and 0.8mm for two layers. |
| Tolerances: Mesh size ± 0.8mm Carrier size ± 0.8mm Finishes Gaskets ± 0.8mm up to 300mm long Holes centres ± 0.4mm |
| To order select the wire type and profile style number and add the required size part number to it. Example: 3.2mm x 3.2mm Monel knitted wire over silicone sponge bonded to a 3.2mm x 9.5mm silicone sponge is part number 382-0032-0032-0032-0095 Add "SAB" to the end of the part number if the environmental seal requires self adhesive backing Normally the sponge core mesh product is supplied with 2 layers of mesh as standard. Contact us for further information. |
| Other sizes and types are available, please contact us for your specific requirements. |
|