 |
300 series - Round Knitted Wire Mesh profiles bonded to Elastomer Cores |
|
| Solid Mesh to Silicone Sponge | Solid Mesh to Neoprene Sponge | ||
 | 392 = Monel wire 394 = TCS wire 396 = S/Steel wire |
| 302 = Monel wire 304 = TCS wire 306 = S/Steel wire |
| Mesh H | Mesh W | Carrier ht | Carrier w | Part No. |
| 3.2mm | 3.2mm | 3.2mm | 12.7mm | 0032-0032-0032-0127 |
| Silicone sponge core to Silicone Sponge | Neoprene sponge core to Neoprene Sponge | ||
| 332 = Monel wire 334 = TCS wire 336 = S/Steel wire |
| 342 = Monel wire 344 = TCS wire 346 = S/Steel wire |
| Mesh Dia | Carrier ht | Carrier w | Part No. |
| 3.2mm | 3.2mm | 12.7mm | 0032-0032-0127 |
| 3.2mm | 3.2mm | 19.1mm | 0032-0032-0191 |
| 4.8mm | 3.2mm | 12.7mm | 0048-0032-0127 |
| Silicone tube core to Silicone Sponge | Silicone tube core to Neoprene Sponge | ||
 | 352 = Monel wire 354 = TCS wire 356 = S/Steel wire |
| 362 = Monel wire 364 = TCS wire 366 = S/Steel wire |
| Mesh Dia | Carrier ht | Carrier w | Part No. |
| 4.0mm | 3.2mm | 12.7mm | 0040-0032-0127 |
| 4.8mm | 3.2mm | 12.7mm | 0048-0032-0127 |
| 6.4mm | 4.8mm | 12.7mm | 0064-0048-0127 |
| Note: All sizes listed are core sizes and allowance must be made for the wire mesh. This is normally 0.4mm for 1 layer and 0.8mm for two layers. |
| Tolerances: Mesh size ± 0.8mm Carrier size ± 0.8mm Finishes Gaskets ± 0.8mm up to 300mm long Holes centres ± 0.4mm |
| Example: 4.8mm dia Monel knitted wire over silicone tube bonded to a 3.2mm x 12.7mm silicone sponge is part number 352-0048-0032-0127 Add "SAB" to the end of the part number if the environmental seal requires self adhesive backing Normally the sponge core / tube mesh product is supplied with 2 layers of mesh as standard. Contact us for further information. |
| Other sizes and types are available, please contact us for your specific requirements. |
|